Briefly describe the installation steps of Tricycle With Cabin

How to install an Tricycle Motorcycle? Tricycle Motorcycle is a commonly used means of transportation and transportation. We all know that the triangle has stability, so the stability of Tricycle With Cabin is generally better than that of two-wheelers, and it is very suitable for the elderly to travel. Most of the Tricycle With Cabin running on the road now have Tricycle With Cabin.

1. Stainless steel glass claw device welding: pop up the vertical and horizontal lines and design elevation according to the design size, clamp it with a clamp, perform positioning spot welding, complete the assembly, and weld the glass claw base.
2. Laminated glass processing and manufacturing installation: Determine the glass size based on the actual measured size according to the design requirements, and install stainless steel glass claws. After the glass is temporarily fixed, adjust it horizontally, vertically, and flatly.
3. Anti-rust spraying treatment for Tricycle With Cabin: Slag and splashes should be removed, and the surface of stainless steel parts should be sprayed with white paint multiple times for anti-rust spraying treatment. The thickness of paint and paint film should comply with the design requirements or construction standards.
4. Glue up and down: Clean the gaps between the glass thoroughly. There should be no water, oil stains, paint, rust, cement mortar, dust, etc. Thoroughly clean the bonding surface and dry it. In order to adjust the depth of the seam and avoid sticking glue on three sides, apply protective tape on both sides of the seam to protect the glass from contamination. Apply sealant to the top and bottom at the same time. After the glue is injected, smooth the surface of the glue seam and remove the excess glue.
5. Adjustment and inspection of the Tricycle Motorcycle shed: The point glass is adjusted and inspected as a whole, and the adjustment standards are horizontal, vertical, and flat.