What standards should the structure of an Tricycle With Cabin meet?

The quality of Tricycle With Cabin products is guaranteed through technical specification requirements, and its technical requirements are mainly for membrane structures. The support structure and various connection structures of the membrane structure of Tricycle Motorcycle should comply with the following standards:

1. Ensure the safe, reasonable and beautiful connection of the Tricycle With Cabin. Moreover, there must be no burrs, sharp corners, or sharp points at the connection between the supporting member and the membrane material.
2. The connecting parts of Tricycle Motorcycle should have sufficient strength, stiffness and durability, and should not be damaged before the connected membrane materials, cables or steel components, and should not cause deformation that affects the mechanical performance of the structure.
3. A high degree of water tightness should be maintained at the membrane connection, and certain structural measures should be taken to prevent wear and tear of the membrane.
4. The node structure should comply with the calculation assumptions. The impact of node structure eccentricity on cables and membrane materials, the method of applying pretension, the allowable deviation of structural installation, and the possibility of secondary tensioning should be considered.
5. Reliable anti-corrosion measures should be taken for the metal connecting parts of Tricycle Motorcycle. Connectors should transmit force reliably and reduce stress concentration at the connection.